Canon i80 Waste Ink Tank Full

Try this to reset the error.

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.

Canon Multi-Pass Fax C855 waste tank reset code

Resetting the Waste Ink Volume Counter

1) Enter SERVICE MODE.....By pressing THEN #.
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT]. Let the printer complete its reset cycle (about 20 seconds).
6) Turn the printer off and on by unplugging the power cord and plugging it back in.

Canon Multipass F30, F60 & F80 waste tank reset code

Resetting the Waste Ink Volume Counter


1) Enter SERVICE MODE.....By pressing Menu THEN Copy THEN #.
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key. (On F30 printers, skip step (6) since there is no [OK] key .)
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.